YOUR LOCATING: HOME » Products > Sea Water Pumps

QS Sea Water Pumps

Model QS sea water pump is a single-stage double-suction horizontal split casing centrifugal pump and used to transport sea water and the liquid of salt solution, the maximum temperature of which must not be over 80℃ , suitable for water supply and drainage in seawater desalination plant,factories, agricultural irrigation, mines, cities and electric stations, waterlogged land drainage and carious hydraulic projects. This series pump comply with the standards of GB/T3 216 and GB/T5657.
  • /images/up_images/201512112932.jpg
  • /images/up_images/201512112933.jpg
  • /images/up_images/201512112936.jpg
  • /images/up_images/201512112935.jpg
  • /images/up_images/20151214194412.jpg
  • /images/up_images/20151214194435.jpg
Both inlet and outlet of the sea water pump are placed under the axial line, horizontally and vertical to the axial line, the pump casing is opened in the middle so it is unneccessary to remove the water inlet and outlet pipelines and motor(or other prime movers) when maintenance. The pump rotating CW viewing from the clutch to it. The pump rotating CCW can also be made, but it should be specially noted when order.                                                                                                                                                                                  
● QS series single stage double-suction, horizontal split casing centrifugal sea water pumps one of the main characters is large flow rate.                                             ● It can reach 110m3/h—10000m3/h.                                                                                                                                                     
● The pump structure simple, easy for operation and maintenance.                                                                                                                      
● It is suitable for sea water or liquids similar to water in physical and chemical property.                                                                                               
● Different types of stainless steel material SS304, SS316, duplex stainless steel are availble for the different liquids.                                                                         ● The pump head range 6-145m, it can be used in series when high head. Small amount of particles <10mm can pass through. 

More Application

Aerospace                          Building Trades
Chemical                           GeneralIndustry Marine
Mining & Aggregate            Oil & Gas
Power Station                    Petro- Chemical
Pharmaceutical                  Pulp & Paper
Water & Wastewater

  
  

  QS Sea Water Pumps composition

1.

Bearing

 

2.

Framework oil seal

 

3.

Bearing gland

 

4.

Pump casing

 

5.

Packing gland

 

6.

Packings

 

7.

Packing ring

 

8.

Packing sleeve

 

9.

Shaft sleeve

 

10.

Pump cover

 

11.

Impeller

 

12.

Washing pipe

 

13.

O ring

 

14.

Seal ring for pump casing

 

15

Mechanical seal liner

 

16.

O ring

 

17.

Mechanical seal


18.

Mechanical seal gland

 

19.

Water retaining ring

 

20.

O ring

 

21.

Bearing housing at driven end

 

22.

Shaft

 

23.

Couplings

 

24.

C type key

 

25.

Framework oil seal

 

26.

Ring for shaft

 

27.

Bearing junk ring

 

28.

Cylindrical pin

 

29.

Mechanical seal

 

30.

Cylindrical pin

 

31.

B type key

 

32.

Packing seal

 

33.

Seal

 

34.

Round nut lock washer

 

35.

Round nut

 

36.

Bearing inner liner

 

37.Pump end bearing housing

38.Bearing spacer 


QS Sea Water Pumps

QS Sea Water Pumps

QS Sea Water Pumps

QS Sea Water Pumps

QS Sea Water Pumps

QS Sea Water Pumps

QS Sea Water Pumps

Copyright © 2014 Shijiazhuang An Pump Machinery Co., Ltd All Rights Reserved