YOUR LOCATING: HOME » Application > Power Plant Pumps

ZLB Axial Pump for power plant

ZLB axial pump is single stage vertical axial flow pump which is suitable for transporting clean water, sewage water, rain water and corrosive liquids. The transmission temperature should not be above 50 ℃. This vertical axial pump is a high flow, low head pump, is widely applied in agricultural irrigation, water conservancy, urban water supply, drainage and sewage treatment, power plants, salt factories and farms for transporting recycled water. ZLB axial pump can also be used in metallurgy, chemical and other industries.The axial pump is vertically installed with the inlet vertical downward and the outlet horizontal extending. The pump and the motor are mouted on separate foundation. And the pump adopts rubber guiding bearings. The seal usually uses packing seal.
  • /images/up_images/2015129184552.jpg
  • /images/up_images/201512918468.jpg
  • /images/up_images/2015129183436.jpg
  • /images/up_images/2015129183459.jpg
  • /images/up_images/2015129184818.jpg
  • /images/up_images/2015129183525.jpg
The impeller is precisely cast with a wax mould, a smooth and unimpeded surface,  identical accuracy of the cast dimension to that in design, greatly reduced hydraulic friction loss and shocking loss, a better balance of impeller, a higher efficiency than that of the common impellers by 3-5%.

Extensively used for hydraulic projects, farm-land irrigation, industrial water transportation, water supply and drainage of cities and water allocation 

Suitable for pumping pure water or other liquids of the physical chemical natures similar to those of pure water.
Medium temperature: ≤50℃
PH value of medium: between 5~11
    

ZLB Axial Pump for power plant




Some of the ZLB Axial Pump for power plant performance curve

ZLB Axial Pump for power plant

Some ZLB Axial Pump for power plant dimension, contact us to get more!

ZLB Axial Pump for power plant

Copyright © 2014 Shijiazhuang An Pump Machinery Co., Ltd All Rights Reserved